Analysis Of Adsorption And Deposition Of All-purpose Industrial Electrostatic Precipitator In General Industrial

Analysis of adsorption and deposition of All-purpose Industrial Electrostatic Precipitator in general industrial

General industrial All-purpose Industrial Electrostatic Precipitator anion adsorption at work, and the sediment deposition, but also have a small amount of dust near the corona wire of positive ion adsorption, and deposition on the corona line, when the dust deposition to a certain thickness, hypertrophy caused by corona line, will greatly reduce the corona effect, so must be timely and effectively remove heavy corona wire system, guarantee the normal discharge corona line, make the general industrial All-purpose Industrial Electrostatic Precipitator can run normally.

The inner part mainly refers to the electrode and precipitation electrode, which mainly depends on the electrode and the depositing electrode. At present, some general industrial All-purpose Industrial Electrostatic Precipitators are not ideal to collect dust, which is mainly the reliability or installation of the electrode vibrating device.

The action of the electrode vibrator is a continuous periodic knock on the electrode frame, which causes the dust on the corona and the frame to be lifted. The main purpose is to discharge the dust of the electrode system.

The main difference is that the electrode vibrating shaft and the hammer are high piezoelectric, so it must be relatively insulated from the shell and the driving device. The vibration force of each row corona line is relatively small compared to the precipitation, so the weight of the electrode is correspondingly smaller than that of the precipitate.

Discharge electrode system oscillation, there is no required heavy piece falling as precipitation extreme problem, so put electrodes can frame at the same time shaking in each row (at the top of the lift shaking) or each row in turn play (playing) lateral vibration, and precipitation is not at the same time shaking in each row, only the continuous periodic oscillation, otherwise, will cause the secondary dust float in the sky.

In the face of the dust collector on the market now, the cloth bag is used for a long time, the state that can appear to remove dust efficiency is low, now general industrial All-purpose Industrial Electrostatic Precipitator is clean method to have what.

General industrial All-purpose Industrial Electrostatic Precipitator cleaning: select suitable cleaning materials and strict ratio. Low temperature water cleaning, water flow uniform, moderate strength, no mechanical damage to filter bags.

Repair of the general industrial All-purpose Industrial Electrostatic Precipitator: repair of damaged filter bags due to wear and tear due to use, ensuring a high return rate. For damaged filter bag accessories, our company will supply new accessories at cost.

General industrial All-purpose Industrial Electrostatic Precipitator dust: using high frequency vibration, will enter the filter bag wall within the larger dust particles removed, will not affect fiber entanglement of fastness, keep the filter bag is good, easy tear of dirt.

General industrial All-purpose Industrial Electrostatic Precipitator drug soak: choose the appropriate chemical soaking dust bag filter bag, the grease dirt removal within the filter bag aperture, maximum limit increased the permeability of filter bag.

Drying of All-purpose Industrial Electrostatic Precipitator in general industrial: using 110 degrees Celsius or so hot air drying, keeping the dimensional stability of the dust bag filter bag, the filter bag is not deformed after drying.

General industrial All-purpose Industrial Electrostatic Precipitator for inspection of packing: completely clean the dust bag filter bag of standard through strict quality inspection, packaging packaging, paste test certificates, shipped to the designated warehouse waiting for shipment.

Chemical experimental treatment for general industrial All-purpose Industrial Electrostatic Precipitator, bag samples, by professional laboratory testing instrument filter bag oil component, which adapt to washing raw materials, the maximum cleaning filter bag and without causing any damage to the filter bag.