Proper Selection of Duct-type Electrostatic Precipitator Air Volume

Air volume is one of the key factors that affect dust removal efficiency and dust removal efficiency. In the selection of the air volume of the pipe electrostatic precipitator, the small dust remover has a small air volume to only a few m /h, and the air volume of the large and medium pipe type dust remover can reach millions of m3/h, so the handling air volume of the pipe type electrostatic precipitator is determined. A factor that can not be ignored.

 

Moreover, the size of the duct type electrostatic precipitator determines the efficiency of the dust collector and the difference of the type of the dust collector. If the volume of dust removal is too large, the area and investment of the equipment will increase.  If the dust removal component is too small and the dust collector runs under the excess air volume, the filter bag will be easily blocked, the life span is shortened, the pressure loss increases and the dust removal efficiency will be reduced.

 

So how do you choose the proper size of the air volume? First of all, it is necessary to know that the handling air volume of the pipe electrostatic precipitator refers to the volume of the gas that the equipment can purify within the unit time, the concentration of the dust at the entrance of the pipe electrostatic precipitator, which is determined by the technology of the dust point.

 

In determining the handling air volume of the pipe electrostatic precipitator, the first is to look at the amount of gas treated under various conditions, and also to consider the air leakage of the dust collector itself, which can not be ignored. The acquisition of these data depends on the operation experience and testing data of professional manufacturers for many years.

 

If the technical data of the pipe electrostatic precipitator can not be obtained because of the limitation of the conditions, the amount of gas produced in the production process can be calculated, and the air volume mixed by the gas collector can be calculated, and the suitable air volume can be obtained.

 

For the pipeline type electrostatic precipitator, in order to improve the efficiency and improve the effect of dust removal, we should not only pay attention to the correct selection of the air volume, but also do not ignore the details of other aspects, including other technical parameters, the operation and maintenance of the equipment, and so on. http://www.icleairs.com/