Instructions for the Use of Pipeline Electrostatic Precipitator
1. Specific resistance of dust: The specific resistance of the tubular electrostatic precipitator to dust is 104-1012 Ohm cm. In this range of dust can choose this series of electrostatic precipitators, dust outside the range, generally considered not to choose electrostatic precipitator, can use bag filter or cyclone precipitator.
2. Wind speed of electric field: The recommended wind speed of electric field is 0.5-1.6 m/min; if the specific resistance of dust is higher or lower, the wind speed of electric field should be lower, but because the nature of gas is changeable. The specific resistance of the same dust varies greatly under different meteorological conditions, humidity and temperature. Therefore, the most reliable method is to measure the treated dust in practice.
3. Dust concentration at the entrance: The entrance requirement of the equipment is generally not more than 35g/m3. When the concentration is more than 35g/m3, special design scheme can be adopted to solve the problem.
4. Treatment efficiency: The design efficiency of pipeline ESP is in the range of 95%-95.5%. When determining the treatment efficiency, it should be based on the principle of economy of emission standards stipulated by the state. On the premise of meeting emission standards, lower efficiency should be selected as far as possible.www.icleairs.com