Forming process of FRP anode for tubular electrostatic dust collector

The fiberglass anodic tube in the pipe electrostatic dust collector is a high efficient cleaning and dedusting equipment made of high grade corrosion resistant vinyl resin, carbon fiber and glass fiber as reinforcement, through hand paste, winding, pultrusion and mould pressing. Different processes can bring different characteristics and effects to pipe forming in electrostatic dust collector.

In the pipe type electrostatic dust collector , the commonly used molding method of the glass steel anode tube is the continuous fiber or cloth tape that soaks over the resin liquid. It is wound on the core mold according to a certain rule and then solidified and demoulding, that is, the desired product is obtained.

According to the winding way, it can be divided into circumferential winding, longitudinal winding and spiral winding. According to the form of resin glue, wet winding is a very common technology. Not only makes the FRP products with high fiber content and high mechanical strength; and because of the use of twisting roving as the main fiber reinforced material, the material cost is low; and because of the free design of the layer and direction of the fiber reinforced material, it can meet the strength demand of various products and realize a large amount of production or automatic production.

Of course, the FRP anode tube in the pipe electrostatic precipitator can also be molded by hand, usually in the form of wood, gypsum, concrete, metal or fiberglass material. The product can be obtained after the mold.

Of course, the FRP anode tube in the pipe electrostatic precipitator can also be molded by hand, usually in the form of wood, gypsum, concrete, metal or fiberglass material. The product can be obtained after the mold.

The main features of this process are short preparation time, simple operation, easy mastering, less investment in equipment, suitable for products with multiple varieties and small output; and the cost of mould manufacturing is low, the size of the products is not limited; the free degree of the product is large, and the product of complex shape can be produced; it can also be made according to the force situation of the product. Local strengthening.

In addition, pultrusion molding is also one of the main forming processes of the anodic tube of the FRP in the pipe electrostatic dust collector. This is a continuous production of the anodized glass steel anode tube by extrusion, heating and curing and fixed length cutting when the continuous glass fiber roving or fabric impregnated resin liquid is produced. The molding method of the product. 

Not only the whole production process can realize automation and high efficiency, and the fiber content of the product is high, the soaking glue is carried out under tension, it can give full play to the function of the reinforced material, the product has high strength, and its longitudinal and transverse strength can be adjusted arbitrarily to meet the requirements of the use of different mechanical properties.http://www.icleairs.com/